• DEFAULT

    How to make colony traps for muskrats

    how to make colony traps for muskrats

    A colony trap is basically a rectangular box made from steel mesh with one way doors on each end. The one way doors allow the muskrats to enter the trap from either direction, but they can not leave. When placed in water that completely submerges the trap, the muskrats quickly expire and are easily removed when you check the trap the following day. Colony Trap Plans - Supplies. You can use a . Aug 18,  · Details and instructions for making a muskrat colony trap.

    This post may contain affiliate links so I earn a commission. These colony trap plans create a great way to make your own muskrat colony trap at home, using just a few simple tools.

    The trap is sturdy, it functions great and it will last for many years. Plus, building your own trap is cheaper than buying one from the store and it's more exciting when you catch a muskrat in a trap you've built yourself.

    Colony traps work great for trapping muskrats because you can catch multiple muskrats in a single daysomething that's not possible if you're using just a conibear trap or footholds. The traps work best when they're set in a muskrat run that's funneled into a small area, such as a noticeable run heading into a bank, or a heavy run leading through thick vegetation.

    Small creeks or steams are also a great spot to use a colony trapespecially where the stream narrows and the muskrats are forced to go through the trap. A colony trap is basically a rectangular box how to dip dye your hair 3 colors from steel mesh with one way doors on each end. The one way doors allow the muskrats to enter the trap from either direction, but they can not leave.

    When placed in water that completely submerges the trap, the muskrats quickly expire and are easily removed when you check the trap the following day. You can use a variety of different styles of wire to build your trap but I've found 1'' x 2'' 14 gauge wire works the best.

    It also allows flowing water to easy pass through the trap without lifting up the entry doors. In addition, the 14 gauge wire creates a much stronger door than the 16 gauge wire. This prevents a mink from blowing out the door from the inside out if it happens to enter your trap to eat one of the muskrats inside. I also used J clips, or rabbit cage clips, to fasten the wire on the sides and to install the doors.

    I like using the J clips because they give a nice professional looking finish and when used on the doors, they allow them to swing freely without binding.

    Begin by cutting a piece of wire 24" long by 30" wide. Since the wire roll was originally 36" wide, the trap can be any length you want up to 36".

    I chose 30" because they're easier to transport but large enough to catch multiple muskrats at one time without plugging up the trap. Use a hammer or rubber mallet to how to make a trebuche the wire as flat as possible. Measure 6" for the first side of the trap and bend the wire up at a 90 degree angle. You can use the scrap piece of lumber and 2 clamps to make an edge to bend the metal against.

    Since each square is 1" tall you can simply count 6 squares which is easier than using a tape measure. I found it's easiest to begin the bend with your hands then take a hammer and square it up along the bottom making a nice, crisp, 90 degree bend. Here's a closer view of the first bend on the colony trap plans. Next, measure another how to cure heart pain naturally and make the second bend using the same method as above.

    Now, repeat the process again bending a third time and completing the rectangle. You should now have a rectangle with each measuring 6 inches wide by 30'' long. Here's a closer view of the J clip being installed on every 2" square. If you've followed the colony trap plans correctly you should now have a rigid, metal rectangular trap measuring 6" wide by 30" deep held together by 15 J clips.

    To make the doors, cut 2 additional pieces of wire 5" wide by 8" long. Secure 1 piece of 5" x 8" wire to each side of the box as shown to create one way doors on each end. Use 3 equally spaced J clips for each door to secure it to the trap. Crimp them just tight enough so the door is stable, but loose enough to allow the door to open and close freely. These colony trap plans allow you to create a solid muskrat trap that works great for trapping multiple muskrats at one time.

    The trap should take about 30 minutes to 1 hour to make and will last for many years. Learn how to get rid of roaches quickly and easily by following these simple steps.

    Explains how to kill cockroaches and how to keep them from coming back. Learn the difference between flying ants vs termites. Explains how to identify and control unwanted swarming insects and keep them from damaging your home. Learn how to protect your vegetable garden or flower bed from garden moles and voles. Includes trapping and repellent techniques to remove them quickly.

    Copyright trap-anything.

    Muskrat Trapping - Basic Muskrat Sets

    Oct 15,  · How to Build a Colony Trap for Muskrats. In this video we show you How to Build a Colony Trap for Muskrats. Colony traps are great tools for adding bigger nu. Nov 25,  · I hope this helps you. As the muskrat swims into the trap through the one way door, the muskrat gets stuck inside the trap until it expires. Once the muskrat expires the trap is still fully operational allowing more muskrats to enter the trap. The option to catch multiple muskrats at one time give these traps a distinctive advantage over conibear traps or foothold traps where only one muskrat can be caught at a time.

    This post may contain affiliate links so I earn a commission. If you're interested in trapping muskrats, a muskrat colony trap is a great addtion to your trapping gear.

    The traps are inexpensive, lightweight and they're capable of catching multiple muskrats at one time. Plus, if you're relatively handy with basic tools you can even make your own trap. The traps are basically a rectangular metal box made out of steel mesh with one way doors on each end.

    As the muskrat swims into the trap through the one way door, the muskrat gets stuck inside the trap until it expires. Once the muskrat expires the trap is still fully operational allowing more muskrats to enter the trap. The option to catch multiple muskrats at one time give these traps a distinctive advantage over conibear traps or foothold traps where only one muskrat can be caught at a time. Since it's common to find several muskrats living in the same area, the traps allow you to catch a lot of muskrats in a short amount of time.

    Colony traps work great in an area where you find a distinctive muskrat run heading into a bank, in narrow streams, or through vegetation where the water is deep enough to completely submerge the trap. Many states require the trap to be fully submerged and be a certain size for legal use, so make sure you check your local laws before setting one of these traps.

    Here's a picture of a typical homemade colony trap. Although the size or dimensions of the trap can be different, they all function the same way. Since the trap is placed in the muskrat run, the muskrat swims into the trap by pushing up on the door. The above picture shows a view of the door open. Notice how the other end of the trap also has a door, but it only allows the muskrats to enter the trap from either direction, not exit once they're inside.

    Once inside, the weight of the door closes behind the muskrat. Since the door is longer than the height of the trap, the door simply binds on the bottom of the trap preventing it from opening. In this set, we located a very distinctive muskrat run heading into a bank. Although it's hard to see in this picture, the bottom was "shined" up really good from the muskrats traveling back and forth.

    When looking for a place to set a colony trap, always look at the bottom. If it looks brighter than the surrounding area, chances are the muskrats are actively using the run. The area looks brighter because the muskrats are pushing away debris and sediment as they swim back and forth exposing rocks and other heaver material.

    There was also a lot of cut vegetation floating on the surface of the water indicating muskrats were active in the area. The depth of the water was about inches deeper than the trap allowing the trap to be fully submerged.

    To set the trap simply bed the trap on the bottom by pushing down and moving it slightly from side to side. Once the trap is placed in the run, secure it in place by using a couple of sticks to cross stake the trap. The cross stakes are not a necessity, it just makes the trap a little more sturdy. That's it, you're done!

    The muskrat colony trap will catch the muskrats from either direction. A muskrat colony trap is a great addition to your trapping supplies. Although conibear traps and foothold traps work great, the colony trap allows you to catch multiple muskrats throughout the day, trapping more muskrats in less time. Learn how to get rid of roaches quickly and easily by following these simple steps.

    Explains how to kill cockroaches and how to keep them from coming back. Learn the difference between flying ants vs termites. Explains how to identify and control unwanted swarming insects and keep them from damaging your home.

    Learn how to protect your vegetable garden or flower bed from garden moles and voles. Includes trapping and repellent techniques to remove them quickly.

    Copyright trap-anything.

    5 comments

    Add a comment

    Your email will not be published. Required fields are marked *