• DEFAULT

    How often to clean a handgun

    how often to clean a handgun

    Cleaning Guns: Why and How Often Should You?

    May 05, †Ј The answer to the question: УHow often should I clean my handgun?Ф is obvious to any experienced shooter. Real simple: Clean it and lightly lube it after every time you shoot it (heavier lube if storing it). And, if it is a carry piece, also brush away lint buildup on a regular basis. A УdeepФ cleaning is a more involved and extensive cleaning, but itТs still necessary to maintain your handgun and extend its useful life. As for how you do this type of cleaning, the steps involved typically include: Х Disassembling the handgun* Х Using a bore brush with a cleaning rod attached that has been dipped in a solvent to.

    If you buy something through a link in our posts, we may get a small share of the sale. Proper firearm cleaning and maintenance is essential. But, there are certain indications and factors you need to be aware of that could adjust your cleaning routine. All metal is susceptible to rust, corrosion through oxidation. As the metal what is the main purpose of biodiversity conservation today, it exposes more area to oxidize.

    Metal can be eaten away until it becomes pitted and weak. Guns come into contact with many potential sources of corrosion Ч open air, water, sweat and skin oil, moisture and humidity, cleaning solvents, primer compounds, and more. Regular cleaning and oiling will help prevent against moisture and potential rust and keep your gun in good condition for years to come.

    They rely on a perfect balance of moving parts to work every time. Grime and grit get in the way of proper mechanical function. By gumming up moving pieces, foreign matter can cause failures to properly feed, eject, and even fire.

    In the worst of cases, a dirty gun can be an outright safety hazard by causing conditions such as bore obstructions or out-of-battery discharges. Regular cleaning and maintenance is essential to keep a gun running in top shape Ч especially one that we trust to defend our lives or put food on our table.

    Every time you shoot your handgunyou should at least field strip it and give it a basic wipe-down. Check the bore for any obstructions or debris and make sure that all moving parts are cleaned and lubricated.

    This is usually done by the manufacturer or a qualified gunsmith. Every single piece, down to the last pin and spring, will be stripped from the gun. These will be carefully cleaned and inspected. Certain springs and wear parts of the handgunsuch as extractors, may be replaced at this time. This is not something that should be attempted by the inexperienced gun owner, as it is very easy to lose or damage small parts and may even void your warranty!

    Every time you take your concealed carry handgun off, wipe it down to remove any sweat or dirt that accumulated. Sweat is acidic and can greatly increase the corrosion speed of your handgun. You should also establish a schedule Ч once every 2 weeks or once a month, for instance.

    At this time you would field strip your handgun for a more detailed cleaning and inspection. Remember, you are trusting your handgun to defend your life and your family if needed, and it needs to work without fail in that moment.

    There is a big difference worth highlighting though. As the bullet is compressed down the bore, it is squeezed into the grooves of the rifling. The grooves push on the bullet and spin it, directing it out the end of the barrel. For perfect accuracy, the bullet must travel the same how to price shipping and handling every time.

    As this happens, the contact of the bullet will leave behind traces of metal either lead or copper what awards did john dalton received the inside of the barrel. You see, a perfectly clean bore will shoot a bullet into a different spot than a fouled bore because of the slightly different path it travels in the barrel. To counteract this, many shooters will take several fouling shots after cleaning.

    This can be a couple of 5-shot groups or a box of ammo. This allows the bullets to consistently foul the bore so they will go to the same place. Some shooters of rimfire rifles and other rifles that use lead bullets hardly ever clean their barrels! They find that the lead shoots better when consistently fouled and that accuracy may hold up for many hundreds or even thousands of rounds.

    In this case, the bores are generally kept lightly oiled. On the other hand, many benchrest shooters clean religiously after every time they shoot and rely on taking fouling shots to keep their gun grouping appropriately.

    Ultimately, when to clean your rifle barrel is up to you. You will have to do some research and experimentation and figure out what kind of barrel cleaning schedule produces the best results for you.

    Regardless, you should still always clean the other parts of your rifle, such as the bolt and extractor, to keep it in good working what is the average thickness of the lithosphere. You should always pay attention to your most important guns, such as those for carry and hunting.

    Sometimes the guns you shoot less fall through the cracks. This is a great idea for keeping up with a large stable of firearms! Do you know the last time you cleaned your old duck shotgun, or the revolver you keep in the nightstand for self-defense?

    Cleaning or at least inspecting all of your guns at once on a regular schedule solves that problem. There are some times you should always clean your gun. Failing to do so can lead to injury or damage. Always clean your gun if the following what are the two fundamental objects in ado. net to you:. Taken a 2-day tactical rifle course with hundreds of rounds fired in rain and snow?

    Shot a grueling 3-gun match that required you to get dirty? Taken a slide down a mud hill with your hunting rifle? Always clean your gun, especially before storing it away in one of those in our top rifle and gun cabinet review. Clean them and pay attention to all the crevices where dirt could be hiding.

    Having a bore obstruction is an incredibly dangerous condition. Eventually it will become too much for the gun to withstand, and can turn your firearm into a grenade Ч one centered right over your hands and face. Unfortunately, it can also be dirty. Some old military ammo is loaded with corrosive primers. The residue in these primers is left in the gun and attracts moisture, which is the enemy of metal.

    Failure to clean after shooting corrosive ammo can result in severe rust, pitting, and structural damage to important parts.

    Your gun may tell you it needs a cleaning by refusing to extract spent shells, failing to go fully into battery, or generally acting up. Rifles may also start to hold poor groups if the barrel gets too dirty. Often, simply cleaning a gun will fix a problem. Not only will you be rewarded for keeping your guns well maintained, so too will future owners for many years to come. James Forrester is a lifelong gun and firearms owner, and an even bigger advocate for gun safety.

    He created KeepGunsSafe. Share Tweet Pin. James Forrester.

    So, How Often Should You Clean Your Gun?

    It's essential to clean your handgun regularly so it continues to work properly and safely. Learn if you should clean your gun after each time you use it.

    We all know that firearms require maintenance and cleaning , but how often should you clean your firearms? Others insist that it is fine to leave your rifle or pistol uncleaned even after multiple trips to the range. If you are shooting corrosive ammunition, or if the firearm is exposed to water, moisture or other damaging elements, you should always clean your gun as soon as possible.

    Corrosive ammunition, water, salts, dust and dirt can all lead to rust, corrosion, excess wear and tear and eventually the early failure of the rifle or pistol. For example, last week I went out hunting with my trusty Remington in Moisture in the barrel could lead to pitting and premature barrel wear.

    I also made sure to run a lightly oiled cloth between the barrel and the stock bed to clear out any trapped moisture or dirt and oil the barrel in that area as well. Stainless steel components do help slow down corrosion and the effects of the elements that cause it, but such parts are more susceptible to excess wear from dirt, dust and fouling. Stainless steel is softer than other steel used in firearms and as such can experience faster wear.

    You should still be aware that semi-automatics and rimfire firearms may begin to show performance and reliability issues with excessive fouling. My Walther G22, my favorite semi-automatic plinker, tends to run fine for about rounds before it begins to have problems cycling dirty. Because of this, I like to keep a bore snake , some CLP and a brush in my range bag to give the action a quick once-over should it start to hiccup.

    Even so, it sometimes makes it through a couple of bricks of Federal. As mentioned above, fouling, dirt and dust can cause reliability issues in semiautomatic firearms. Revolvers are not immune to fouling either: carbon build up on the cylinder can make a double-action trigger nearly impossible to pull as the cylinder gap becomes clogged. For match guns , most semiautomatics run more accurately and more reliably when clean. Bolt-action rifles , on the other hand, often require a fouling shot for the best consistency out of a cold bore.

    For this reason, it is sometimes easier to clean these rifles at the range where you can then fire a fouling shot from non-corrosive ammunition so that the bore is ready to go. You can clean it at home and store it without a fouling shot; just remember that your bore will need a fouling shot to prep the bore prior to competition. Depending on how often they are used, all firearms should periodically undergo a professional detailed cleaning where the firearm is torn down and thoroughly cleaned, oiled and reassembled.

    How often this is necessary depends on the number of rounds fired through the gun and the role it typically is used for, but I like to detail strip and clean all of my firearms at least once a year regardless of whether or not they ever made it out of the gun safe at all. On firearms that are just being stored in a safe, ambient moisture in the air and humidity can cause some small rust spots to show up.

    Desiccants such as Hyskore drying silica gel will help reduce the humidity in your safe and cut down on rust caused by this moisture in the air. An annual cleaning not only makes sure that all of your guns are clean and stored properly, but also gives you the chance to inspect each firearm for problems that you may not normally notice. By replacing them early, an unexpected failure was prevented.

    Final note: always make sure to wear the proper safety gear when cleaning your firearms, and always clean in a well lit and well-ventilated area. Some chemicals and solvents are dangerous and have fumes that can be unsafe to breathe. Proper eye protection, gloves and a respirator are always recommended when working with gun cleaning chemicals.

    How often do you clean your gun? What do you use to clean it? Let us know in the comments below! I clean my guns after every time I shoot them. And I do a rust inspiration every two weeks just to stay ahead of things. And I do a function test on them. Each week I clean my firearm carefully and every month I clean my arm either I use or not.

    Occasionally after every use I cleaned my Firearm. By the I enjoy the article. I just recently purchased an 9mm. How often should I clean it? Many thanks for sharing this guide.

    Yeah, it will wear out the brush. The hardness of the barrel is MUCH harder than the brush material. How can I add to what Eloy said? Sometimes you read a comment that just nails it, and that was certainly done here. Thank you pertaining to revealing the feeling and make within the great work.

    I also clean my firearm after every use and once a month if it has not been used. The main reason that I do this is because I love my firearm and enjoy cleaning it! I personally clean mine after each use. A matter of opinion I guess. Time limit exceeded. Leave a Comment Your discussions, feedback and comments are welcome here as long as they are relevant and insightful. Please be respectful of others. We reserve the right to edit as appropriate, delete profane, harassing, abusive and spam comments or posts, and block repeat offenders.

    All comments are held for moderation and will appear after approval. Notify me of follow-up comments by email. Notify me of new posts by email. Previous Post Next Post. The Mission of Cheaper Than Dirt! We want you, our readers, to be able to make informed decisions. The information provided here does not represent the views of Cheaper Than Dirt! Cancel reply Your email address will not be published.

    4 comments

    Add a comment

    Your email will not be published. Required fields are marked *